<tbody id="prgib"></tbody><del id="prgib"></del>
<th id="prgib"><track id="prgib"></track></th>

<dd id="prgib"></dd>

<button id="prgib"><object id="prgib"></object></button>
    <th id="prgib"></th>

    1. 產品中心&Product Center
      反擊式破碎機
      Impact Crusher

        反擊式破碎機(新型反擊式破碎機):
        反擊式破碎機,是利用沖擊能來破碎石料的碎石機械。反擊式破碎機工作時,在電動機的帶動下,轉子高速旋轉,物料進入板錘作用區時,與轉子上的板錘撞擊破碎后拋至反擊襯板上再次撞擊破碎,然后又從反擊襯板上彈回到板錘作用區重新撞擊破碎,此過程重復進行,石料由大到小進入第一、第二、第三破碎腔重復進行破碎,石料經被破碎后由出料口排出。調整反擊架與轉子之間的間隙或調節轉子轉速,改變出料粒度。
        反擊式破碎機破碎產出的成品石子呈似立方體、無張力、無裂縫,符合高速公路、高速鐵路、攪拌站等對石子的質量要求。適用于中等偏硬以下硬度、進料粒度≤300mm、出料粒度≤50mm石料的破碎(具體進出料粒度要根據石料硬度并通過選擇機型來確定)。
        公司對反擊式破碎機的技術參數進行了優化。轉子板錘采用卡塊壓緊裝置裝配,裝卸簡便、運轉安全可靠;科學設計撞擊角度,增大撞擊力,使石料在破碎腔內下行過程中重復多次形成石料與板錘、石料與反擊襯板、石料與石料之間相互撞擊,從而提高石料的破碎率、提高成品產量、降低磨損成本;在兩腔機型中增加底座撞擊襯板,形成第三破碎腔,增加撞擊次數;側門加大,板錘、反擊襯板更換或機腔內檢查維護更加方便。
        新型反擊式破碎機,主軸改用40Cr鋼材加工;軸承改用歐洲優質品牌專用軸承;增加配置均衡送料器,使石料在破碎腔內分布均勻,增加石料的撞擊面;采用Z型板錘、板錘利用率高;采用可移動式方鋼,當板錘磨損、板錘與方鋼間隔過大時,移動方鋼避免間隔過大而漏料,確保石料的全部撞擊破碎,從而保證成品石子的質量。已獲國家專利。


        Impact Crusher(New Type Impact Crusher):An impact  crusher  is a stone crushing machinery using impact energy to crush  stones . When the impact crusher is working, the rotor driven by the electromotor rotates at a high speed, and the  stones enter  the functioning area of   blow bars  and impact the blow bars mounted on the rotor  and are crushed , and  then thrown onto the impact liners to be crushed again by impact,  and rebounded into the functioning area of  blow bars to be crushed  once more by impact. Such a  process will be repeated for stones to enter the 1st, 2nd and 3rd crushing cavity based on the size range from big to small until the crushed stones are  small enough to escape from the bottom discharging port .  It is possible to change the discharge sizes by adjusting the space between the impact rack and the rotor , or by adjusting the rotating speed of the rotor .
        The crushed stone product  produced by impact crusher  is of a similarly cubic shape  , free of tension and free of fissures, meeting the requirement of high quality stipulated by expressway , high-speed  rail and cement mixing station  and so on. It is suitable for crushing  stones with  less than medium hardness and with feeding sizes of no more than 300 mm and discharging  sizes of  no more than 50 mm(however, the specific feeding and discharging sizes  should be decided by the  stone hardness and by choosing crusher models .).
        Our company has optimized the technical parameters of impact crusher . Blow bars on the rotor are assembled with clamping block  devices , easy to be installed  and dismantled ,and safe and reliable to operate. The impact angles are designed scientifically , increasing the impact force . Repeated impact between stones and blow bars , between stones and impact  liners, and rock-on-rock will occur for many times when the stones move down in the crushing cavity, leading to higher crushing rate and higher finished product output, and less abrasion cost . Impact liners are added on the base of the two-chamber type impact crusher for forming the third crushing cavity and increasing impact times . The side door is enlarged,  and it becomes more convenient to replace blow bars and impact liners, or to make examinations  and carry out maintenance inside the  machine  chamber.
        New Type Impact Crusher : The main shaft  is made of 40Cr steel instead. Dedicated  quality bearings of European  brand are used instead ; an equilibrium feeder is added,  allowing  stones to distribute uniformly in the crushing cavity and improving the utilization of  impacting space inside the crushing cavity. Z type blow bars are adopted for higher utilization  rate  of  blow bars. Movable  square steel is adopted . When  the gap between the blow bar and square steel becomes too big because of  blow  bar  abrasion , the square steel may be moved to avoid too big gap and  stone leakage  , ensuring all stones crushed by impact and the quality of finished  gravels. The new type impact crusher has been awarded national patent .

      技術參數Technical  parameters

      型號規格
      Type

      進料粒度
      Feed
      size

      出料粒度
      (排料范圍)
      Discharge size
      (Discharge range )

      生產能力
      Capacity

      轉子直徑
      Rotor diameter

      轉子轉速
      Rotor speed

      電機功率
      Electromotor power

      重量
      Weight

      外型尺寸
      Exterior
      Dimensions


      Remarks

      (mm)

      (mm)

      (t/h)

      (mm)

      (r/min)

      (kW)

      (t)

      長寬高(m)
      L×W×H
      (m)

      PF1315

      花崗石
      Granite
      ≤80

      ≤40
      (25-80)

      100-150

      φ1320×1500

      568

      220

      20.9

      3.08×2.71×2.70

      配Y系列電機 配自耦啟動柜260kW
      Y series motor and auto-coupling starter cabinet (260kW) configured

      硬石灰石
      Hard limestone
      ≤160

      ≤50
      (25-80)

      120-180

      530

      石灰石
      Limestone
      ≤240

      ≤60
      (25-80)

      145-220

      492

      PF1315B

      花崗石
      Granite
      ≤100

      ≤40
      (25-80)

      100-150

      φ1320×1500

      568

      220

      21.8

      3.08×2.71×2.70

      配Y系列電機 配自耦啟動柜260kW
      Y series motor and auto-coupling starter cabinet (260kW) configured

      硬石灰石
      Hard limestone
      ≤200

      ≤50
      (25-80)

      120-180

      530

      石灰石
      Limestone
      ≤300

      ≤60
      (25-80)

      145-220

      492

      PF1315/3

      花崗石
      Granite
      ≤90

      ≤40
      (25-100)

      120-180

      φ1320×1500

      568

      220

      21.8

      3.08×2.71×2.70

      配Y系列電機 配自耦啟動柜260kW
      Y series motor and auto-coupling starter cabinet (260kW) configured

      硬石灰石
      Hard limestone
      ≤180

      ≤50
      (25-100)

      145-220

      530

      石灰石
      Limestone
      ≤270

      ≤60
      (25-100)

      175-260

      492

      PF1315/3B

      花崗石
      Granite
      ≤100

      ≤40
      (25-100)

      120-180

      φ1320×1500

      568

      220

      22.6

      3.08×2.71×2.70

      配Y系列電機 配自耦啟動柜260kW
      Y series motor and auto-coupling starter cabinet (260kW) configured

      硬石灰石
      Hard limestone
      ≤200

      ≤50
      (25-100)

      145-220

      530

      石灰石
      Limestone
      ≤300

      ≤60
      (25-100)

      175-260

      492

      PF1214

      花崗石
      Granite
      ≤70

      ≤40
      (20-80)

      80-120

      φ1250×1405

      601

      132

      17.0

      2.50×2.40×2.89

      配Y系列電機 配自耦啟動柜160kW
      Y series motor and auto-coupling starter cabinet (160kW) configured

      硬石灰石
      Hard limestone
      ≤140

      ≤50
      (20-80)

      100-150

      562

      石灰石
      Limestone
      ≤210

      ≤60
      (20-80)

      120-180

      522

      PF1214B

      花崗石
      Granite
      ≤80

      ≤40
      (20-80)

      100-150

      φ1250×1405

      601

      160

      18.0

      2.50×2.40×2.89

      配Y系列電機 配自耦啟動柜190kW
      Y series motor and auto-coupling starter cabinet (190kW) configured

      硬石灰石
      Hard limestone
      ≤160

      ≤50
      (20-80)

      120-180

      562

      石灰石
      Limestone
      ≤240

      ≤60
      (20-80)

      145-220

      522

      PF1210

      花崗石
      Granite
      ≤70

      ≤40
      (20-80)

      60-90

      φ1250×1050

      602

      110

      14.0

      2.50×2.04×2.89

      配Y系列電機 配自耦啟動柜120kW
      Y series motor and auto-coupling starter cabinet (120kW) configured

      硬石灰石
      Hard limestone
      ≤140

      ≤50
      (20-80)

      80-120

      562

      石灰石
      Limestone
      ≤210

      ≤60
      (20-80)

      100-150

      522

      PF1010

      花崗石
      Granite
      ≤60

      ≤40
      (20-60)

      50-75

      φ1000×1050

      763

      75

      11.5

      2.31×1.85×2.47

      配Y系列電機 配自耦啟動柜90kW
      Y series motor and auto-coupling starter cabinet (90kW) configured

      硬石灰石
      Hard limestone
      ≤120

      ≤45
      (20-60)

      60-90

      711

      石灰石
      Limestone
      ≤180

      ≤50
      (20-60)

      70-105

      661

      PF1007

      花崗石
      Granite
      ≤60

      ≤40
      (20-60)

      25-40

      φ1000×720

      763

      55

      9.0

      2.31×1.50×2.47

      配Y系列電機 配星三角啟動柜75kW
      Y series motor and Star delta starter cabinet (75kW) configured

      硬石灰石
      Hard limestone
      ≤120

      ≤45
      (20-60)

      30-45

      711

      石灰石 Limestone
      ≤180

      ≤50
      (20-60)

      40-60

      661

      XPF1620

      花崗石
      Granite
      ≤100

      ≤40 (30-100)

      200-300

      469

      400

      42.8

      3.55×3.35×3.30

      配電機 配軟啟動柜450KW

      硬石灰石
      Hard limestone
      ≤200

      ≤50 (30-100)

      240-360

      438

      石灰石
      Limestone
      ≤300

      ≤60 (30-100)

      280-420

      407

      XPF1418

      花崗石
      Granite
      ≤100

      ≤40 (25-100)

      140-210

      524

      280

      30.6

      3.00×2.97×2.87

      配電機 配軟啟動柜320KW

      硬石灰石
      Hard limestone
      ≤200

      ≤50 (25-100)

      170-255

      489

      石灰石
      Limestone
      ≤300

      ≤60 (25-100)

      200-300

      454

      XPF1314

      花崗石
      Granite
      ≤80

      ≤40 (20-80)

      100-150

      φ1345×1405

      558

      200

      21.9

      2.52×2.38×2.80

      配Y系列電機 配自耦啟動柜225KW

      硬石灰石
      Hard limestone
      ≤160

      ≤50 (20-80)

      120-180

      520

      石灰石
      Limestone
      ≤240

      ≤60 (20-80)

      145-220

      482

      花崗石
      Granite
      ≤100

      ≤40 (30-100)

      300-450

      φ1600×2105

      6.40×4.20×4.50

      配電機 配智能控制系統450KW

      XPF1620

      花崗石
      Granite
      ≤100

      ≤40 (30-100)

      200-300

      469

      400

      42.8

      3.55×3.35×3.30

      配電機 配軟啟動柜450KW

      硬石灰石
      Hard limestone
      ≤200

      ≤50 (30-100)

      240-360

      438

      石灰石
      Limestone
      ≤300

      ≤60 (30-100)

      280-420

      407

       
      在線咨詢
      Inquiry Online
      欧美人与动牲交免费观看一_香蕉大美女天天爱天天做_日本熟妇美熟BBW_乱中年女人伦av三区
      <tbody id="prgib"></tbody><del id="prgib"></del>
      <th id="prgib"><track id="prgib"></track></th>

      <dd id="prgib"></dd>

      <button id="prgib"><object id="prgib"></object></button>
      <th id="prgib"></th>